Hot Selling Smoke Only Wireless Fire Protection Smoke Detector 10 Years Wireless Interconnected Smoke Sensor

• Customization: Available
• Type: Smoke Alarm
• Signal Transmission: Wireless Alarm
• Model NO.: TSS381D-HR
• Working Mode: Active
• Certification: CE, ISO, RoHS, CCC, Bsi, NF
• Application: Indoor
• Working Principle: Electro-Optical Type
• Alarm Volume (within 1m): ≥90dB
• Receive Frequency: 433.92MHz
• Certificate: CE, Bsi, Ukca, NF, RoHS, Reach, ISO9001, BSCI
• Special Features: Wireless Type
• Power Source: DC 3V
• Wireless Interconnection Function: up to 40 Devices.
• RF Function: Radio Frequency 433MHz
• Transport Package: Carton
• Trademark: JBE
• Origin: Hangzhou, Zhejiang
• Production Capacity: 100000 Piece/Month

Product Description

Built-in 3V lithium battery photoelectric smoke alarm with RF function

Technical Specifications:

Power Source	DC 3V battery	Low Voltage Threshold	≤2.6V
Operation Current	≤8uA	Hush time	8minutes
Alarm Sensitivity	0.10 - 0.16dB/m	Product service life	>10 years
Comply with standard	EN 14604:2005/AC:2008	Humidity Range	< 93% relative humidity (RH)
Alarm Current	≤60mA	Temperature Range	0ºC to 40ºC
Alarm Volume	>85dB(A) @ 3 meters.	Size	120mm in diameter x 35.5mm depth
Sound Pattern		(BI 0.5s - pause 0.5s - BI 0.5s - pause 0.5s - BI 0.5s - pause 1.5s, with the RED LED flash, repeat this alarm pattern)

Details of the product function:

Standby mode	After the product is installed, if the smoke alarm device is operating properly, the red LED flashes once every 48 seconds
Alarm mode	When the smoke alarm device detects particles of combustion and the concentration of smoke reaches the alarm threshold, the red LED will flash once per second with pulsating alarm until the smoke is disappeared.
Low battery mode	When the battery voltage is below threshold, the red LED will flash once every 48 seconds with a sound of "chirp"
Fault mode	If the alarm detection signal decays below threshold, the alarm chirp occurs without LED flashes every 48 seconds.
Silence mode	Press the test button at least 2 seconds, it will go into silence mode for approx 8 minutes. That will desensitize the alarm sensitivity temporarily. At this time, the red LED will flash once every 8 seconds;
Non disturb mode	When the alarm device is in low battery mode, in order to avoid disturbing your at night, Please press the test button for 3 seconds which will mute this warning tone for about 14 hours. After 14 hours, the warning tone will still go off. The red LED will flash once every 48 seconds during No disturb mode.
Test mode	Test the unit to ensure operate properly by pressing the test button. At this time, the red LED will flash once per second with pulsating alarm until test button is released.
Wireless interconnection alarm sound mode	BI - BI - pause 1.2s, with the red LED flash, this alarm pattern is repeated.
NOTE	WEEKLY TESTING ONE TIME IS REQUIRED.